Hewlett Packard Enterprise Hot-Plug 300GB 10K Rpm 2.5

£ 140.50 ex. VAT
Dualport SAS 6G

Substitute HDD Qualification Procedure

When fulfilling a service spares order, customers may receive a hard disk drive that is different from their original. Substitute devices are necessary as older technology products reach end-of-life and are no longer available on the market. The HP HDDQ process consists of sophisticated, vigorous testing to ensure that disk drive substitutions are compatible with customers' systems. Customers enjoy peace of mind knowing that HP has developed and maintains one of the most disciplined and well-structured testing processes in the industry. With superior qualification and testing, HP is able to offer a three-year pre-failure warranty on HP SCSI hard disk drives.


The differences between the original and substituted product may be in spin speed, capacity, interface, or all of these.


Hewlett Packard Enterprise 300GB 6G SAS SFF. HDD size: 2.5", HDD capacity: 300 GB, HDD speed: 10000 RPM

507284-001


5704327613640

507127-B21, 507119-004, 507129-004, 418399-001, 432320-001, 518011-002 , 389346-001, 625271-001 , 518194-002, 507283-001, 689287-001, 862119-001
  • 100+ in stock (Denmark)
  • 100+ incoming stock (4 weeks into our warehouse)
  • 100+ incoming stock (Contact us)
£  140.50ex. VAT

More information about the product

300GB hot-swap dual-port Serial Attached SCSI (SAS) hard drive - 10,000 RPM, 6Gb/sec transfer rate, 2.5-inch Small Form Factor (SFF) - (Option 507127-B21, Model MB3000FBNWV)

*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.
For the whole PDF, click here

Substitute HDD Qualification Procedure
When fulfilling a service spares order, customers may receive a hard disk drive that is different from their original. Substitute devices are necessary as older technology products reach end-of-life and are no longer available on the market. The HP HDDQ process consists of sophisticated, vigorous testing to ensure that disk drive substitutions are compatible with customers' systems. Customers enjoy peace of mind knowing that HP has developed and maintains one of the most disciplined and well-structured testing processes in the industry. With superior qualification and testing, HP is able to offer a three-year pre-failure warranty on HP SCSI hard disk drives (Must be running HP Insight Manager for Pre-Failure Warranty).

The differences between the original and substituted product may be in spin speed, capacity, interface, or all of these. HP addresses these factors with the procedures described below:

Spin Speed
The rotational speed of the disk, commonly referred to as 'rpm', has changed in recent years from 7200 to 10,000, and now to15,000 rpms. Increased spin speed results in reduced mechanical latency, which makes for a higher performing drive. A faster spin speed can also result in a drive that consumes more power and dissipates more heat. However, by reducing the rotating mass of the drive, these effects can be negated. As part of the HDD stringent qualification process, HP measures the power consumption of all drive types. Only drives with equal or lower power consumption characteristics relative to the original are allowed to be substituted into older applications.

Interface
Since 1981, there have been several generations of the SCSI protocol. Each new generation has doubled the performance of the previous one. SCSI performance has ranged from an 8-bit, single-ended (SE) interface transferring data up to 4 MB/s to the latest 16-bit, low-voltage differential (LVD) interface transferring data at 320 MB/s per channel. The drive communicates with the host controller across this interface, and much work has been done throughout the industry to retain backwards compatibility as new interfaces have been introduced. Although there have been many generations of SCSI, there are only three basic SCSI specifications: SCSI-1, SCSI-2, and SCSI-3.

Drives utilizing the newer interfaces can be substituted into older applications as long as the physical connections are compatible. The interface speed at which the drive and host controller operate at will be the slower of the two devices. Each drive on the bus negotiates independently with the host controller.

Capacity
Capacity is the disk drive parameter that has experienced the most growth. Steady increases in areal density have pushed the size of SCSI drives from 4.3GB to 146GB in less than ten years. The amount of data that can be put onto a single platter dictates the minimum capacity point for a given generation of product. Typically, substituting a higher capacity drive for a smaller capacity has no effect on the performance of an application. When a larger drive is introduced into an existing RAID set, the additional capacity above that of the existing set is unusable.

However, this has no effect on the operation. Smaller capacity drives can be artificially created by limiting the useable capacity of a drive through the firmware. Essentially, the firmware only allows a given amount of the total capacity to be accessed. HP employs this method in order to provide lower capacity drives after the native capacity units are no longer available. The HP qualification process includes testing of these drives to ensure continued compatibility in customer systems.

Summary
When hard disk drives age and reach end-of-life status, substitute drives are necessary. Spin speed, capacity, interface, or all of these factors are taken into account with HP HDDs. Customers will have peace of mind when employing HP HDD substitutes knowing that HP quality tests every hard disk drive before approving it for use. By purchasing HP disk drive products, the customer has bought into a tradition of excellence and commitment that consistently produces the highest quality at competitive price points, designed to fully integrate across the HP enterprise class line of servers and storage.
Features
HDD size2.5"
HDD capacity300 GB
HDD speed10000 RPM
InterfaceSAS
Component forServer/workstation
Hot-swap
Power
Operating voltage5 V
Other features
Internal
Data transfer rate6 Gbit/s
Additional information
Warranty1 Year
Capacity300 GB
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.

{{vmRightBottomPopup.successMsg}}

{{vmRightBottomPopup.title}}

{{vmRightBottomPopup.body}}

*
*
Add to your favorites
Remove
Remove from this list
Recently Visited
You have visited the page recently
Favorite Item
The item is in your favorite items list.
Notify me
Get an email <br/> when this product <br/> is available in our stock
Pricedrop
Rebate is based on standard prices and has been deducted from the listed price